[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Secondary Coil
I get my magnet wire from a local motor repair shop. I just call them up and tell them how many pounds of what gauge and build and they have it ready for me by the time I drive there.
--- On Sat, 6/14/08, Nicholas J. Goble <ngoble@xxxxxxx> wrote:
From: Nicholas J. Goble <ngoble@xxxxxxx>
Subject: [TCML] Secondary Coil
To: tesla@xxxxxxxxxx
Date: Saturday, June 14, 2008, 5:59 PM
After obtaining my NST, I think my next step should be constructing the
secondary coil. I plan on having a 4" diameter coil using 24 AWG wire.
I got these figures off deepfriedneon.com. Does this sound right?
I am having a difficult time finding magnet wire in my area. Would it
be better for me just to order a spool of 1000' wire? I've seen a few
good listings on Ebay for about $30 and was wondering if this is a good
way to obtain my wire?
Thanks for all your answers. I kind of feel guilty that I'm starting a
lot of new threads that are probably second nature to experienced
coilers. Thanks for putting up with my constant nagging. ;^)
Nicholas Goble
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla