[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Primary selfC
Bart,
I am not sure how much the secondary will effect the primary, its why I used
loose coupling to stop the interaction as much...
I am not sure this is going to be easy to measure, as I have to build the
primary and then its pretty much fixed, so its not easy to alter it to test
with and without the secondary coil :-(
Chris
----- Original Message -----
From: "bartb" <bartb@xxxxxxxxxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Friday, July 25, 2008 3:26 AM
Subject: Re: [TCML] Primary selfC
Chris,
Thinking about your high Q secondary, it's one thing to measure the
primary outdoors away from objects to determine C. However, when in
position with the secondary, it is wise to measure it with everything else
in place as C will change. I'm not sure how much, but you need to measure
it in it's location. With such a low tank, not only is the primary C
becoming significant, but also the external C.
Regards,
Bart
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla