[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] magnet wire



Hi Jim, all,

The Essex distributor in Memphis (Essex-Brownell)
sells it in reasonably small quantities, as in single, pre-
wound and prewieghed 6" spools (generally 8 to 12 lbs.)
or 12" spools (generally 80 to120 lbs.) - at least they still
did the last time that I purchased from them. That was
probably 3 or 4 years ago now. However, they did not,
nor does any other distributor, as far as I know,
sell it by the foot. Suppose there isn't too much pro-
cessing involved in selling manufactured copper wire in
prewound, preweighed spools.

David Rieben

----- Original Message ----- From: "Jim Lux" <jimlux@xxxxxxxxxxxxx> To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>; "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Wednesday, July 02, 2008 9:58 AM
Subject: Re: [TCML] magnet wire




-----Original Message-----
From: stamsund <stamsund@xxxxxxxxxxxxxx>
Sent: Jul 2, 2008 9:29 AM
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: Re: [TCML] magnet wire

Thanks Dave,

I found an Essex distributor who sells original factory spooled Essex wire
for less.  They also include a warning about buying respooled wire.


Since a big part of the cost of the wire is the cost of the copper used to make it, and the price of copper varies quite a bit, it's perfectly reasonable to get better or worse prices from various vendors at various times, particularly at retail. There was a time when Lowes was selling AWG12 house wire amazingly cheaply, because they had bought a huge amount, then the price of copper went up, but they were selling it at a price based on the amount they paid.

Someone who is a small resale sort of operation might buy several hundred pounds of wire, set their prices accordingly, and sell small quantities for quite a while before going out and buying another big batch.

While buying direct from the mfr is nice (you have good quality control and handling), a lot of times, there will be a minimum order that's fairly large. 1000 ft of wire, for instance, is an order much too small for a big distributor to handle. Their order processing costs will probably be larger than the cost of the wire.



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla