[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] 6x24 spun toroid bulk buy, anyone?



Any idea of the approximate cost? I'm considering. Wyatt

-------------- Original message -------------- 
From: "Terry Oxandale" <Toxandale@xxxxxxx> 

> I'm game. 
> 
> ox 
> 
> -----Original Message----- 
> From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On 
> Behalf Of David Rieben 
> Sent: Tuesday, January 29, 2008 12:02 PM 
> To: Tesla list 
> Subject: [TCML] 6x24 spun toroid bulk buy, anyone? 
> 
> Hi all, 
> 
> I am making gradual progress in my mid-sized SG driven coil 
> project and am beginning to think about a top load for it. Al- 
> though the dryer duct toroid is certainly the most economical 
> answer for a top load, it is not very asthetically pleasing and 
> is also too dent proned and fragile. I would like to get a 6x24 
> spun toroid and was hoping to get enough interest to pursue 
> a bulk buy from O.W. Landergren to help somewhat reduce 
> the cost. Any takers? 
> 
> David Rieben 
> _______________________________________________ 
> Tesla mailing list 
> Tesla@xxxxxxxxxxxxxx 
> http://www.pupman.com/mailman/listinfo/tesla 
> _______________________________________________ 
> Tesla mailing list 
> Tesla@xxxxxxxxxxxxxx 
> http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla