[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Polishing Metal (ie Brass) after machining . . .



autoparts store and look for mothers mag wheel polish.
  it will do alot of different metals.
  it is a white paste and does superb on plain ole t6061 aluminum.
  then wipe off with alchol or the like.
   
  less than 5 dollars last time i checked.
   
  tim

"McCauley, Daniel H" <daniel.h.mccauley@xxxxxxxx> wrote:
  Another machining question . . .

What is the best way to finish and polish metal (such as brass,
aluminum), once it is machined?

Thanks
Dan
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla