[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Hi power/ little coil??



Ignoring the obvious difficulty with breakout, it's the power that would cause the secondary to breakdown. But, if power is kept below that level and the secondary has the ability to develop a charge at the top load capable of breakout, then no problem. It's been done with magnifiers. The largest ratio of coil dia. to toroid I've built is a 4.5" coil with 24 awg using a 9" x 30" toroid. Worked fine. The coil was the 3rd coil in the system.

http://www.classictesla.com/photos/hybrid/hybrid.html

Bart

BunnyKiller wrote:
Hey All...

I've never done it, but was thinking about it, and was wondering what would be the results??

Take one hi power piggie set up and run a 4" dia. coil wound with say 20 - 22g wire for a length of about 30".... and lets go one step further and add a "huge" toroid ( compared to the secondary toroid =12"X56" lotsa topload ;) )

Would it produce lengthy streamers or just melt the secondary???

Scot D
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla