Re: [TCML] Hi power/ little coil??

["Phillip Slawinski" <pslawinski@xxxxxxxxx>]

I've never tried a 4" secondary, but I only run my 6" at high power.  If
you're using a static gap, make sure the gap is not set too wide, and that
it's not over coupled.

My secondary has some battle scars, but I've only had racing sparks when the
gap was too wide.

On Sat, Dec 6, 2008 at 07:34, BunnyKiller <bunnikillr@xxxxxxx> wrote:

> Hey All...
>
> I've never done it, but was thinking about it, and was wondering what would
> be the results??
>
> Take one hi power piggie set up and run a 4" dia. coil wound with say 20 -
> 22g wire for a length of about 30".... and lets go one step further and add
> a "huge" toroid ( compared to the secondary   toroid =12"X56" lotsa topload
> ;)  )
>
> Would it produce lengthy streamers or just melt the secondary???
>
> Scot D
>
>
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla