[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Terry filter - does one need the current limiting resistors with a current limited NST?



The resistors are there to dampen transients which make it through the filter. The resistor values can be changed to accommodate other transformers as needed, but for the 6/50 NST, your fine using the listed values (1k, 100W). Be sure to only use 10 MOV's with this 6kV rating, otherwise the MOV's will not protect the NST. You will still have filtering action without the 2 large resistors, but you won't have that resistance needed to dampen out transients and other possible issues (such as the NST, wiring, etc.. becoming resonant with the tank cap).

Take care,
Bart

Thomas Ryckmans wrote:
Hello,

Constructing the Terry Filter now... does one need the current limiting
resistors with a current limited NST? Mine is 6kV 50 mA

Cheers!

Thomas

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla