[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: V11.1 for JAVATC (fwd)
---------- Forwarded message ----------
Date: Tue, 04 Sep 2007 00:12:27 -0700
From: Barton B. Anderson <bartb@xxxxxxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: V11.1 for JAVATC (fwd)
Feel free to mingle through the code as you wish and change what you
like for yourself. I don't even care if you recreate the whole thing and
add your "wants" to it (if anyone is wondering). Of course, if you ever
make it available for others, just give it a different name (so as not
to confuse one from another). This actually happened once where this new
program was given the same name. I had no problems with him modifying
it, but I did have a problem when he posted it as Javatc. He could have
called it "Better than Javatc" and I would have been happy, just as long
as it was somehow differentiated from the original Javatc.
Take care,
Bart
Tesla list wrote:
>---------- Forwarded message ----------
>Date: Tue, 4 Sep 2007 12:39:49 -0400
>From: Slurp812 <slurp812@xxxxxxxxx>
>To: Tesla list <tesla@xxxxxxxxxx>
>Subject: Re: V11.1 for JAVATC (fwd)
>
>THANKS! I didn't want to mess with it unless I had permission :) I
>understand the work involved. I work in IT!
>
>
>On 8/31/07, Tesla list <tesla@xxxxxxxxxx> wrote:
>
>
>>---------- Forwarded message ----------
>>Date: Thu, 30 Aug 2007 21:44:07 -0700
>>From: Barton B. Anderson <bartb@xxxxxxxxxxxxxxxx>
>>To: Tesla list <tesla@xxxxxxxxxx>
>>Subject: Re: V11.1 for JAVATC (fwd)
>>
>>Yes, if you want to load your own "demo coil" data, you need to look
>>inside the "script" folder and locate the file called JTC_inputs.js.
>>Open this file in something like Notepad or script editor. Near the
>>bottom portion of the file you'll see the following data I'll show
>>below. Just replace the value z = value with "your" value for that input
>>and save the file. Just be sure you don't change anything else.
>>
>>You might want to rename the original JTC_inputs.js as a different name
>>to maintain the original file if something goes wrong. Just make sure
>>the file you modify is named JTC_inputs.js. If you save it using Notepad
>>and Notepad adds a .txt extension to the end, remove the .txt part of
>>the name.
>>
>>Take care,
>>Bart
>>
>>////////////////////////////////////////////////////////////////////////////
>>// Load Demo Coil values into form field inputs
>>////////////////////////////////////////////////////////////////////////////
>>function loadDemo(form) {
>> demomsg = ('Click RUN JAVATC to run demo coil.');
>> Clear(form);
>> form.msg.value = demomsg;
>> form.units.selectedIndex=0; inches==true;
>> form.ambient.selectedIndex=0; fahrenheit==true;
>> GetUnits(form);
>> form.s_ws.checked = false;
>> form.s_awg.checked = true;
>> form.p_ws.checked = true;
>> form.p_awg.checked = false;
>> //form.GapStyle.selectedIndex=3;
>> z = 68; {eval(z); temp = z; form.temp.value = temp;}// ambient
>>temperature
>> z = 100; {eval(z); g_radius = z; form.g_radius.value = g_radius;} //
>>gndr
>> z = 100; {eval(z); w_radius = z; form.w_radius.value = w_radius;} // war
>> z = 150; {eval(z); r_height = z; form.r_height.value = r_height;} // roh
>> z = 2.26925; {eval(z); s_radius1 = z; form.s_radius1.value =
>>s_radius1;} //sr1
>> z = 2.26925; {eval(z); s_radius2 = z; form.s_radius2.value =
>>s_radius2;} //sr2
>> z = 23; {eval(z); s_height1 = z; form.s_height1.value = s_height1;}
>>//sh1
>> z = 44.8085; {eval(z); s_height2 = z; form.s_height2.value =
>>s_height2;} //sh2
>> z = 895; {eval(z); s_turn = z; form.s_turn.value = s_turn;} //st
>> z = 24; {eval(z); s_wd = z; form.s_wd.value = s_wd;} //swd
>> z = 3.75; {eval(z); p_radius1 = z; form.p_radius1.value =
>>p_radius1;} // pr1
>> z = 7.969; {eval(z); p_radius2 = z; form.p_radius2.value =
>>p_radius2;} // pr2
>> z = 23; {eval(z); p_height1 = z; form.p_height1.value = p_height1;}
>>// ph1
>> z = 23; {eval(z); p_height2 = z; form.p_height2.value = p_height2;}
>>// ph2
>> z = 8.438; {eval(z); p_turn = z; form.p_turn.value = p_turn;} //st
>> z = .25; {eval(z); p_wd = z; form.p_wd.value = p_wd;} //swd
>> z = .0188; {eval(z); Cp_uF = z; form.Cp_uF.value = Cp_uF;} //swd
>> z = 30; {eval(z); Lead_Length = z; form.Lead_Length.value =
>>Lead_Length;} // lead length
>> z = .2; {eval(z); Lead_Diameter = z; form.Lead_Diameter.value =
>>Lead_Diameter;} // lead length
>> z = 0; {eval(z); desired_k = z; form.desired_k.value = desired_k;}
>>// desired_k
>>
>> z = 21; {eval(z); t_outer = z; form.t_outer.value = t_outer;} // tout
>> z = 6.25; {eval(z); t_inner = z; form.t_inner.value = t_inner;} // tin
>> z = 48.8085; {eval(z); t_height = z; form.t_height.value =
>>t_height;} // tht
>> add_toroid();
>> z = 8.25; {eval(z); d_outer = z; form.d_outer.value = d_outer;} // dout
>> z = 0; {eval(z); d_inner = z; form.d_inner.value = d_inner;} // din
>> z = 48.8085; {eval(z); d_height = z; form.d_height.value =
>>d_height;} // dht
>> add_disc();
>>
>> z = 120; {eval(z); x_Vin = z; form.x_Vin.value = x_Vin;}
>> z = 12000; {eval(z); x_Vout = z; form.x_Vout.value = x_Vout;}
>> z = 60; {eval(z); x_Iout = z; form.x_Iout.value = x_Iout;}
>> z = 60; {eval(z); x_Hz = z; form.x_Hz.value = x_Hz;}
>> z = 140; {eval(z); x_Vadjust = z; form.x_Vadjust.value = x_Vadjust;}
>> z = 0; {eval(z); x_ballast = z; form.x_ballast.value = x_ballast;}
>> z = .35; {eval(z); x_Rp = z; form.x_Rp.value = x_Rp;}
>> z = 4520; {eval(z); x_Rs = z; form.x_Rs.value = x_Rs;}
>>
>> z = 1; {eval(z); rsg_ELS = z; form.rsg_ELS.value = rsg_ELS;}
>> z = 4; {eval(z); rsg_ELR = z; form.rsg_ELR.value = rsg_ELR;}
>> z = 1800; {eval(z); rsg_rpm = z; form.rsg_rpm.value = rsg_rpm;}
>> z = 10.6; {eval(z); rsg_disc_D = z; form.rsg_disc_D.value = rsg_disc_D;}
>> z = 0.375; {eval(z); rsg_ELR_D = z; form.rsg_ELR_D.value = rsg_ELR_D;}
>> z = 0.375; {eval(z); rsg_ELS_D = z; form.rsg_ELS_D.value = rsg_ELS_D;}
>>
>> z = 6; {eval(z); stat_EL = z; form.stat_EL.value = stat_EL;}
>> z = 1.25; {eval(z); stat_EL_D = z; form.stat_EL_D.value = stat_EL_D;}
>> z = 0.25; {eval(z); stat_gap = z; form.stat_gap.value = stat_gap;}
>> form.SPE.checked=true;
>> form.RGE.checked=false;
>>
>>Tesla list wrote:
>>
>>
>>
>>>---------- Forwarded message ----------
>>>Date: Thu, 30 Aug 2007 23:58:54 -0400
>>>From: Slurp812 <slurp812@xxxxxxxxx>
>>>To: Tesla list <tesla@xxxxxxxxxx>
>>>Subject: Re: V11.1 for JAVATC (fwd)
>>>
>>>I was just recently using JavaTC to work out some of the last details.
>>>before I finish my coil. This is an excellent program! I also work ion
>>>the IT field, and I am familiar with what we call a dot-0 release!
>>>With out you and just about everyone else on this list, I wouldn't
>>>almost have a working coil. I need a few more things, and lots more
>>>time, but it will make sparks, someday. I only have one question, is
>>>there anyway to "load" coil data in via a data file of some sort?
>>>
>>>
>>>On 8/27/07, Tesla list <tesla@xxxxxxxxxx> wrote:
>>>
>>>
>>>
>>>
>>>>---------- Forwarded message ----------
>>>>Date: Sun, 26 Aug 2007 12:33:56 -0700
>>>>From: Barton B. Anderson <bartb@xxxxxxxxxxxxxxxx>
>>>>To: Tesla list <tesla@xxxxxxxxxx>
>>>>Subject: V11.1 for JAVATC
>>>>
>>>>Hi All,
>>>>
>>>>I uploaded version 11.1 to replace V11.
>>>>
>>>>(D.C., I'll send another CD).
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>
>
>
>
>
>
>
>