[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: fFINAL REPORT Cu COIL vs Al COIL (fwd)



---------- Forwarded message ----------
Date: Wed, 10 Oct 2007 14:36:24 +0000
From: "Lau, Gary" <Gary.Lau@xxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: RE: fFINAL REPORT Cu COIL vs Al COIL (fwd)

First column labeled "f" is frequency, in KHz.  5000-2400KHz is 5 thru 2.4MHz.

Regards, Gary Lau
MA, USA

> -----Original Message-----
> From: Tesla list [mailto:tesla@xxxxxxxxxx]
> Sent: Wednesday, October 10, 2007 10:03 AM
> To: tesla@xxxxxxxxxx
> Subject: Re: fFINAL REPORT Cu COIL vs Al COIL (fwd)
>
>
> ---------- Forwarded message ----------
> Date: Tue, 09 Oct 2007 09:39:07 -0400
> From: Dave Pierson <davep@xxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Subject: Re: fFINAL REPORT Cu COIL vs Al COIL (fwd)
>
>                           Cu
> >> _______________             ______________
> >> f        Q      C        Leff     Q      C       Leff    Q
> >> (Cu/Al)
> >> 5000    565    103.5     9.78    655    102.2    9.91    1.16
> >> 4500    547    129       9.69    625    129      9.70    1.14
> >> 4000    515    164       9.65    600    163      9.71    1.17
> >> 3500    505    214       9.66    565    211      9.80    1.12
> >> 3000    479    293.5     9.59    535    291.5    9.66    1.12
> >> 2500    438    428       9.47    495    423.5    9.57    1.13
> >> 2400    425    463       9.50    490    460      9.56    1.16
> >> 0      0                                0
> >>
> >> Frequencies in kHz, capacitance in uufd
>  I take it that the first table column is Frequency?
>  50 MHhz thru 24 MHz?
>
>  Or am i rong?
>  best
>   dwp
>
>