[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Oscilloscope



You can't view amplitude, but you can view frequency. Don't connect the probe to the coil (you'll fry the scope immediately). Just hang a little wire in the probe end and a good distance out of spark range. If a spark finds the probe, you'll fry the scope.

Take care,
Bart

Clive Hansen wrote:
Hello,
I recently acquired a Tektronix 453 oscilloscope. Is there any way to view the output from a 800kv Tesla coil through it without damaging it. It is an old (1965) tube model.

-Clive
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla