Re: [TCML] Nee recommendation for a SRSG motor arbor

["David Rieben" <drieben@xxxxxxxxxxx>]

Curt,

I think it's because the collar has a split design. I'm really pleased with
mine on my ARSG, although I'm told that I need another piece for the
collar to slip into for the ensamble to be complete. However, I'm not
running it with near the rigor that it would see in a 100% duty cycle in-
dustrial environment, so I think my setup will be fine.

David

----- Original Message ----- 
From: "C. Sibley" <a37chevy@xxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Friday, November 23, 2007 11:56 AM
Subject: Re: [TCML] Nee recommendation for a SRSG motor arbor


> I've seen those in catalogs but I guess the name split *taper* scared me 
> off.  I thought they were for a tapered shaft or something.  Do you know 
> why they call them that?
>
> Thanks,
>
> Curt.
>
>
> ----- Original Message ----
> From: David Rieben <drieben@xxxxxxxxxxx>
> To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
> Cc: David Rieben <drieben@xxxxxxxxxxxxxxx>
> Sent: Friday, November 23, 2007 6:25:11 AM
> Subject: Re: [TCML] Nee recommendation for a SRSG motor arbor
>
> Hi Curt,
>
> You may also look into "spilt-taper bushings"
>
> http://cgi.ebay.com/Woods-Split-Taper-Bushing-SD-5-8_W0QQitemZ300144363419QQihZ020QQcategoryZ42924QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
>
> I used one of these in the ARSG of my Green Monster coil to
> secure the disc to the shaft of my DC motor.
>
> http://www.teslauniverse.com/members/drieben/
>
> David
>
>
>
> ____________________________________________________________________________________
> Never miss a thing.  Make Yahoo your home page.
> http://www.yahoo.com/r/hs
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla