[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] STRIATIONS



Another semi-offtopic "cool demo" idea.  I have heard that argon gas makes
the sparks larger/longer?  Someone once suggested that I get one of those
smoke ring launchers (http://www.zerotoys.com/newsite/products.htm) and
shoot argon gas rings at the topload for a lightning donut effect.



On Nov 18, 2007 8:35 AM, Ed Phillips <evp@xxxxxxxxxxx> wrote:

>    Striations in the discharge between two electrodes can be seen
> easily at some gas pressures and are a rough measure of the pressure.
> I've observed them often enough and think they are most visible when the
> pressure is still over a mm.  Set up a discharge tube and a vacuum pump
> and observe them as the pressure goes down.  Put a pinch clamp on the
> tube to the pump and you can hold the pressure and observe at your
> leisure.
>
>    Every guy playing with TC's and HV in general should also have a
> vacuum pump available as there are lots of interesting visual
> experiments to be run.  Even a converted rotary AC or refrigerator pump
> is plenty good enough to get down into this pressure range.
>
> Ed
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla