[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: power factor correction capacitors (fwd)



---------- Forwarded message ----------
Date: Mon, 2 Jul 2007 05:08:20 -0500
From: Michael Strube <mjstrube@xxxxxxxxxxxxx>
To: 'Tesla list' <tesla@xxxxxxxxxx>
Subject: RE: power factor correction capacitors (fwd)

Surplus City Liquidators usually is a good source for cheap caps:

http://www.surpluscityliquidators.com/

Mike

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx] 
Sent: Sunday, July 01, 2007 10:15 PM
To: tesla@xxxxxxxxxx
Subject: Re: power factor correction capacitors (fwd)


---------- Forwarded message ----------
Date: Sun, 01 Jul 2007 21:57:59 -0400
From: Scott Bogard <teslas-intern@xxxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: Re: power factor correction capacitors (fwd)

Considering that I don't get to the junkyard everyday (sadly), and since DC 
capacitors are relatively cheap for their voltage/capacitance rating, could 
I use two parallel strings of DC caps, each protected by a diode to keep the

power flowing the right way, or would this not work (or if I grounded the 
strings)?  For my power supply, Java TC is suggesting I need a 295 uf cap 
size, and considering how low the values of motor run capacitors generally 
are, I would need a whole lot of them!  Thanks.
Scott Bogard.


>From: "Tesla list" <tesla@xxxxxxxxxx>
>To: tesla@xxxxxxxxxx
>Subject: Re: power factor correction capacitors (fwd)
>Date: Sun, 1 Jul 2007 17:25:04 -0600 (MDT)
>
>
>---------- Forwarded message ----------
>Date: Sun, 01 Jul 2007 12:33:25 -0400
>From: David Speck <dave@xxxxxxxxxxxxxxxx>
>To: Tesla list <tesla@xxxxxxxxxx>
>Subject: Re: power factor correction capacitors (fwd)
>
>Scott,
>
>IMHO, it's not worth it to try to build a PFC cap.  You can get metal
>can (oval or round) oil filled motor run caps for free from dead air
>conditioners, refrigerators, some furnaces, or dehumidifiers at your
>local recycling center.  Usually, the bigger the original device, the
>bigger the cap.  They are also available from eBay.  Even microwave oven
>caps work, but at only 1 uF each, you would need several in parallel.
>Motor run caps will have a definite capacitance value, like 6 uF at some
>voltage, stamped into the case.
>
>Do not use round black plastic encased electrolytic motor start caps --
>they are intended for a duty cycle of only a few seconds, and get hot
>and explode if run continuously.  Start caps usually have a very wide
>range of capacitance printed on the case, like 50 - 120 uF at some
>voltage.
>
>Dave
> > Hey everybody,
> >      Can anybody tell me where I can get, some capacitors to use for 
>power
> > factor correction (and how much it would cost me)?  Would it be insanely
> > difficult to build one?  Could I use motor start or run capacitors?  
>Thanks.
>
>
>

_________________________________________________________________
Need a break? Find your escape route with Live Search Maps. 
http://maps.live.com/default.aspx?ss=Restaurants~Hotels~Amusement%20Park&cp=
33.832922~-117.915659&style=r&lvl=13&tilt=-90&dir=0&alt=-1000&scene=1118863&
encType=1&FORM=MGAC01