Re: New guy plans (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Thu, 23 Aug 2007 23:12:20 -0500
From: resonance <resonance@xxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: New guy plans  (fwd)


For best performance from a small coil, use 26 or 28 AWG.  15 is too large.


Dr. Resonance

Resonance Research Corp.
www.resonanceresearch.com


----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Thursday, August 23, 2007 5:39 PM
Subject: Re: New guy plans (fwd)


>
> ---------- Forwarded message ----------
> Date: Thu, 23 Aug 2007 14:24:12 -0700
> From: Bryan Polinder <b.polinder@xxxxxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Subject: Re: New guy plans  (fwd)
>
>
> ----- Original Message ----- 
> From: "Tesla list" <tesla@xxxxxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Thursday, August 23, 2007 6:42 AM
> Subject: Re: New guy plans (fwd)
>
>
> thank you  those that have responded  the last couple of days I have been
> digesting more and more data mined from various web sources .  I have down
> loaded JavaTc what a lifesaver!!  the time spent in the math alone was 
> going
> to drive me insane < I am not a math whiz >  my feelings are understand 
> the
> formulas....let the slide rule  figure it out < dating myself there > . I
> have traded the 1/2 copper pipe for 1/4 inch  saved a bit of cash on that
> man has copper gone through the roof in the last year or what? rummaged
> around the outbuilding and found a 100ft roll of 15AWG supertwist 
> 210strand
> wire  maybe can use that for hook ups , also a bunch of  4 " schedule 40
> ABS.. would that be O.K. for secondary coil form? was hoping there was a
> variac out there but no such luck I think the wives dad got rid of it a 
> year
> or so ago  . so now I'm on  search for that too 120 in 140 out at 10 
> should
> be about the right size would it not? I suppose I shall have to visit the
> dark mistress E-bay , will pick up the stuff for a terry filter there too 
> .
> sorry for the blathering and the myriad of questions but its better to
> measure twice and cut once as they say .
>
> thank you again
> B
>
>
>
>