[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: first post (fwd)



---------- Forwarded message ----------
Date: Wed, 15 Aug 2007 10:36:34 -0500
From: resonance <resonance@xxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: first post (fwd)





These Maxwell caps on E-bay are only rated for 1-5 pps and will usually 
explode if operated at 120 or more pps.

They will work but only for very short runs.



Dr. Resonance

Resonance Research Corp.
www.resonanceresearch.com


----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Wednesday, August 15, 2007 7:49 AM
Subject: first post (fwd)



---------- Forwarded message ----------
Date: Wed, 15 Aug 2007 07:34:54 -0500
From: Terri Neeley <neeley_111@xxxxxxx>
To: tesla@xxxxxxxxxx
Subject: first post

Hey guys im new to coiling but I am building my second coil and I need some
help.  I don't want to make the same costly mistakes as I did on the first
coil.  I will have 2 ge 5021g10 wired for 9000v 225ma for a spark gap coil. 
My
question is:  What capacitors should i go with?  I need .06microfarad so I
thought about the maxwell you see floating around ebay?  2 in parallel of 
the
35k .03mF would work but would it survive?  Any suggestions would be great 
Thx
in advance.
Garry Neeley

_______________________________________________________________________________________

Find a local pizza place, movie theater, and more….then map the best route!