[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Bipolar coil question (fwd)



---------- Forwarded message ----------
Date: Tue, 7 Aug 2007 12:02:11 -0500
From: James <mustang3@xxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: Bipolar coil question (fwd)

Two separate secondarys coils, primarys are in series. James
----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Tuesday, August 07, 2007 10:49 AM
Subject: Bipolar coil question (fwd)


> 
> ---------- Forwarded message ----------
> Date: Tue, 07 Aug 2007 11:12:51 -0400
> From: Shad Henderson <shenderson@xxxxxxxxxxxxxxxx>
> To: tesla@xxxxxxxxxx
> Subject: Bipolar coil question
> 
> Hi All, 
> 
> I'm having a brain fade, and can't jog the information loose in there. 
> 
> I'm in the process of building a small bipolar coil (to replace my
> testbed that went up in smoke), and I can't remember...
> 
> Do I calculate Fres of the secondary as a whole (IE, lump both topload
> C's together and do it as one secondary), or do I calculate it as two
> separate coils, with the center point to the ends as the length of each
> coil?  
> 
> I forget, and I'm at work, so I can't simply throw my signal generator
> on it to see.  
> 
> Thanks!
> 
> Shad H. 
> 
> 
> 
> 
>