[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: SISG question



Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>

Hi Dan,

You really don't have to change anything. Just fire it at 3600V. You can probably make the MMC out of fewer caps since the voltage and current are less. All the values stay pretty much the same.

If your coils are small, you probably want to use small secondary wire to keep the resonant frequency low. Otherwise, you might have too low of primary coil value.

Cheers,

        Terry


At 06:05 AM 9/28/2006, you wrote:
I want to build a couple of small SISG coils using Mark Dunn's SISG boards, which I have. I would like to make the use systems use only one SISG board each, for firing at 3600 Volts. What would I have to change my tank cap values to, and, would I have to change anything else in Terry's Piranha circuit to make this happen?
Thanks,
Dan K.