[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (Fwd) bleeder resistors used with MMC

To: tesla@xxxxxxxxxx
Subject: Re: (Fwd) bleeder resistors used with MMC
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Fri, 03 Nov 2006 06:55:57 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Fri, 3 Nov 2006 07:00:51 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <pCRhHxD7wPN.A.10B.Tu0SFB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: Yurtle Turtle <yurtle_t@xxxxxxxxx>

http://www.hot-streamer.com/adam/burnt_mmc.jpg

A few have failed.

--- Tesla list <tesla@xxxxxxxxxx> wrote:

> Original poster: "Peter Terren"
> <pterren@xxxxxxxxxxxx>
>
<snip> Most use a single 1/2 watt 10M resistor per
> cap. This has always
> worried me as it is way overvolting the resistors
> rating of perhaps
> 500 - 800 V but in this pulse application they don't
> seem to
> fail.
</snip>

Prev by Date: Re: PIRANHA - New Top Load Configuration
Next by Date: Re: dual MOT Tesla coil design is complete (fwd)
Previous by thread: Re: (Fwd) bleeder resistors used with MMC
Next by thread: Re: (Fwd) bleeder resistors used with MMC
Index(es):
- Date
- Thread