[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: tank voltage



Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>


At resonance it usually exceeds SQR 2 x Erms. Typical measured is 2.0 x Erms and, during the era of spark gap transmitters (Condensors by Coursey), it was measured at 2.2 x Erms as a typical value.

Dr. Resonance



Gary Lau posted this info about NST peak voltage:
http://www.pupman.com/listarchives/2004/October/msg00279.html.  To
capsulate, multiply the transformer voltage by 1.414.

Hal in Tucson



----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Friday, May 19, 2006 5:33 PM
Subject: tank voltage


> Original poster: "Gates" <ryker@xxxxxxx>
>
> Hey gang
> How do you calculate the maximum voltage in the tank circuit?
> Gates
>
>
>