[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Clear Coat for Secondaries ? ? ?

To: tesla@xxxxxxxxxx
Subject: Clear Coat for Secondaries ? ? ?
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Mon, 15 May 2006 09:25:41 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Mon, 15 May 2006 09:14:40 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <GJxOS7sXpUM.A.1-F.grJaEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Mccauley, Daniel H" <daniel.h.mccauley@xxxxxxxx>

Can someone recommend a good clear coat for secondary coils that looks
aestetically good.  This will be used for a secondary coil wound on
clear acrylic tubing.  The standard polyurethane is no good since it
dries yellow and flakes.  Perhaps a two-part epoxy?

Any help appreciated!

Thanks
Dan
http://www.easternvoltageresearch.com

Prev by Date: Re: 11 foot arc right off the bat
Next by Date: Re: 11 foot arc right off the bat
Previous by thread: santa fe coilers
Next by thread: Re: Clear Coat for Secondaries ? ? ?
Index(es):
- Date
- Thread