[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 11 foot arc right off the bat



Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>



Cap not rated for correct pps duty is the usual suspect. Use the 37 series for Tesla coil work.

Dr. Resonance



That Maxwell looks just like mine, it blew the same way last week! What a mess!

Anyone have any thoughts if this failure mode is due to over-voltage or over-current?

Curt.


----- Original Message ----
From: Tesla list <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx
Sent: Sunday, May 14, 2006 12:53:22 PM
Subject: Re: 11 foot arc right off the bat


Original poster: "David Rieben" <drieben@xxxxxxxxxxxxxxx>

Miles,

Was the crack of the case of the 50 KV Maxwell
caused by internal failure or a drop on the concrete?

David Rieben

----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Sunday, May 14, 2006 1:43 PM
Subject: 11 foot arc right off the bat


>Original poster: "miles waldron" <mileswaldron@xxxxxxxxxxx>
>
>I have become Ken's publicist. Check out the White Knight, kenscoil.com, >a
>work in progress. We are trying to come up with a practical, nice way, to
>document our work and reasoning. Any suggestions are appreciated, but >please
>be polite. We are serious coilers.
>
>http://www.kenscoil.com/whitenight-May-13-2006.htm
>