[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: SSTC transformers

To: tesla@xxxxxxxxxx
Subject: RE: SSTC transformers
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Tue, 09 May 2006 12:50:19 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Tue, 9 May 2006 12:35:59 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <hE8KxTn4A9E.A.nlG.PEOYEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Mccauley, Daniel H" <daniel.h.mccauley@xxxxxxxx>


Actually, thats not correct either.  If you want to be precise, the no
margin rail-to-rail voltage for a H-bridge that actually switches would
be 1000V minus Vce (conducting IGBT) not 1000V+Vce.

Dan
"DRSSTC : Building the Modern Day Tesla Coil" Book
Available Friday, May 12, 2006
Visit http://www.easternvoltageresearch.com for more information.



>The no margin rail to
>rail voltage for a H bridge that actually switches would be 1000v for
>1000v IGBTs. (Or if you want to be precise, 1000v+Vce on)
>
>Jimmy H.

Prev by Date: RE: SSTC transformers
Next by Date: Re: Racing Spark Prediction
Previous by thread: RE: SSTC transformers
Next by thread: Re: SSTC transformers
Index(es):
- Date
- Thread