[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tungsten rod - GROUP ORDER



Original poster: Jeff Larson <jeff@xxxxxxxxxxxxx>

How much did they charge to cut the pieces of tungsten?
Where can you get 1/2" and 3/8" welding rod?

Jeff

Tesla list wrote:

Original poster: "Stephen Mathieson" <sm@xxxxxxxxxx>

A cheaper method may be to buy tungsten welding rod and then find a die
grinding shop to cut them to length.  This is what I did and it worked out
to about $5 a piece.  The die grinding shop managed to hold +/- .0002
tolerance even though I didn't ask them to!

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Saturday, March 11, 2006 9:51 PM
To: tesla@xxxxxxxxxx
Subject: Re: Tungsten rod - GROUP ORDER

Original poster: Jeff Larson <jeff@xxxxxxxxxxxxx>

I am interested in 3/8 x 1.5 inch tungsten.  Is there a date for this order?

Jeff Larson

Tesla list wrote:

>Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>
>
>Hi All,
>
>Jim Mora started a request to see how many would be interested in going
>in on a bulk purchase of pure tungsten  1/2 x 1.5 inch rod.  His price
>quote was $15 per rod.  I'm interested in 3/8 rod and I just got a
>quote from Diamond Ground Products for $8.75 for the 3/8x1.5 inch rod
>with a minimum order of 25.  Quote for 2 inch length of same was $11.65
>each with the same minimum.
>
>
>Are there any out there interested in the smaller version of the
>tungsten rod.  If so, you can email me directly and I can work with Jim
>to see if this benefits his purchase.
>
>Take care
>Gerry R.
>