Re: Holy Crap!

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "BRIAN FOLEY" <ka1bbg@xxxxxxxxxxx>

Hi, i wished i had marked the english site with the info i read. i searched
and dont find it again. as for German language there is German, and High
German and also technical German. i can barley speak good english say
nothing of another language. In the article i read it said a clay pipe was
used to isolate the electrode, this makes sense, clay is porus, would allow
steam to be made between the electrode and clay shooting a stream of steam
upward. any molecular sieve material that allows salt water to be conductive
thru it might be a good answer to this project..cul brian f.
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Friday, June 09, 2006 11:27 PM
Subject: Re: Holy Crap!


> Original poster: BunnyKiller <bunnikillr@xxxxxxx>
>
> Hmmm   a tube  and "clay"  makes one think of a ceramic insulator ...
>
> just a thought...
>
> Scot D
>
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.3/360 - Release Date: 6/9/06
>
>