[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 48KWATT DRSSTC Warmup



Original poster: "Barton B. Anderson" <bartb@xxxxxxxxxxxxxxxx>

Agreed. Definately great news to know there appear to be several folks running MMC's at high power levels!
Thanks everyone for speaking up.

Take care,
Bart

Tesla list wrote:

Original poster: "Hooper, Christopher AZ" <christopher.az.hooper@xxxxxxxxx>

This is great news as maybe not as much of a risk for me to use on 48kwatt coil after all, will order 500 caps and resistors this weekend.

Thanks for inputs indeed!
Rgs,
Christopher robin
--------------------------
Sent from my BlackBerry Wireless Handheld


-----Original Message-----
From: Tesla list <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx <tesla@xxxxxxxxxx>
Sent: Fri Jan 27 10:12:25 2006
Subject: Re: 48KWATT DRSSTC Warmup

Original poster: Mr Gregory Peters <s371034@xxxxxxxxxxxxxxxxx>

I can also second this. Myself and Peter Reid both run power levels
over 10kW with identical mmc caps for minutes at a time, with no
failures or even heating. These caps consist of 144 CDE geek group
0.15uF 2kV caps in series/parallel for a total of 0.15 uF at 24kV. I
run about 13kV in with a pole pig, and he runs an 8-stack mot supply
with potentially 19kV or so.

Cheers,

Greg Peters
Department of Earth Sciences,
University of Queensland, Australia
Phone: 0402 841 677
http://www.hot-streamer.com/greg2



----- Original Message -----
From: Tesla list <tesla@xxxxxxxxxx>
Date: Friday, January 27, 2006 12:15 pm
Subject: Re: 48KWATT DRSSTC Warmup
 > Original poster: "Hooper, Christopher AZ"
 > <christopher.az.hooper@xxxxxxxxx>
 > Cool, good to know! Thanks for the input.
 >
 > Rgs,
 > Ch r
 > --------------------------
 > Sent from my BlackBerry Wireless Handheld
 >
 >
 > -----Original Message-----
 > From: Tesla list <tesla@xxxxxxxxxx>
 > To: tesla@xxxxxxxxxx <tesla@xxxxxxxxxx>
 > Sent: Thu Jan 26 11:21:40 2006
 > Subject: Re: 48KWATT DRSSTC Warmup
 >
 > Original poster: "Robin Copini" <rcopini@xxxxxxxxxxxxx>
 >
 > sorry to say it, back I dont think so,  I run an MMC using dubilier
 > .33uf caps at 33kv out at 100 amps (240 volt ac), around 24 KVA for
 > 15-20, 5 metre arcs for 15 minutes at a time with no problems, you
 > build em big enough, they will last.
 >
 > robin - in OZ
 >
 >
 > ----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
 > To: <tesla@xxxxxxxxxx>
 > Sent: Thursday, January 26, 2006 12:56 PM
 > Subject: Re: 48KWATT DRSSTC Warmup
 >
 >
 > >Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>
 > >
 > >
 > >The MMC won't take this kind of power level.  You will need to run
 > >the big Maxwells like we do on our coils over 6 kVA.
 > >
 > >
 > >Dr. Resonance
 > >
 > >
 > >
 > >>I thought I would share my newest creation, a 10kwatt DRSSTC @
 > >>http://users.cableaz.com/~chooper/images/fatboy1wred.jpg .
 > >>
 > >>Since I use plexy, I thought embedding high output UV LED's
 > would be
 > >>cool and looks like a spark gap running from the distance @
 > >>http://users.cableaz.com/~chooper/images/fatboyblue.jpg .
 > >>
 > >>Little red DRSSTC (ran at the Cheesehead)is in front of new
 > DRSSTC for
 > >>comparison, as the 10kwatter is almost 8 feet. 120 caps for the
 > MMC and
 > >>is fan cooled as I push my MMC's to melt down....he he. First
 > light is
 > >>this weekend.....then off to the 48kwatter DRSSTC...... first
 > step of
 > >>the 48kwatter is the 9 foot by 3 foot secondary. 48kwatter
 > DRSSTC will
 > >>also use a big, very big MMC; start soldering iron up indeed
 > (maybe 500
 > >>caps or so)
 > >>
 > >>
 > >>Rgs,
 > >>Christopher robin
 > >>
 > >
 > >
 >
 >
 >