Original poster: BunnyKiller <bunikllr@xxxxxxx> Hey David...have you considered using the resistors from a hi voltage probe... buy a couple of them off of ebay ( the probes) remove the resistors and use the appropriate values of smaller resistors ( the ceramic/carbon types found in the power line caps black and white striped about 2.5" long 1/4" dia.) to achieve a 1:100 divider along with some cheap meter ( just in case you get an impressive ring up )
Scot D been snipped... Tesla list wrote:
Original poster: "David Rieben" <drieben@xxxxxxxxxxxxxxx> Hi all, I am pondering a way to reliably measure 10 KVDC across the terminals of (2) 100 µFd energy dis- charge caps that I plan to build a quarter shrinker/ can crusher project with.