Re: New Stackpole HV Resistors

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Sparktron01@xxxxxxxxxxx 

Hi DC

IDK what is going on.  I suspect they made this announcement to
"drum up orders".  Parts look really good though for typical bleeder,
HV divider, meter multiplier applications that are constantly posted...

Regards
Dave Sharpe, TCBOR/HEAS


 -------------- Original message ----------------------
From: "Tesla list" <tesla@xxxxxxxxxx>
> Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>
>
>
>
> Strange, but at the Stackpole website this series is not
> mentioned.  Even using the search feature for the MG series "no
> document found" comes up.
>
> Dr. Resonance
>
>
>
>
> >Original poster: Sparktron01@xxxxxxxxxxx
> >http://www.eeproductcenter.com/showArticle.jhtml?articleID=179102514
> >
> >Found this in a trade "e-magazine" at work today and thought would be of
> >interest to the list.  Cost is "aggressively" reasonable for 
bleeder and other
> >high stress HV applications.  Resistors are good for voltages 2 to 4X that
> >of conventional form factor resistors available through Radio
> >Sh..  or Digikey.
> >
> >Expand to full screen message and copy text into your browser. Interesting!
> >
> >Regards
> >Dave Sharpe, TCBOR/HEAS
> >Chesterfield, VA. USA
> >
> >
>
>
>