[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Did I just make a blunder?



Original poster: "C. Sibley" <a37chevy@xxxxxxxxx>

Yup, understood.  I realized that immediately after
winding the coil, and that is why I consulted the
group...

--- Tesla list <tesla@xxxxxxxxxx> wrote:

> Original poster: BunnyKiller <bunikllr@xxxxxxx>
>
> Turning it upside down wouldnt matter as far as wind
> direction  it
> would still be wound in the same direction as
> before...
> for example.... a piece of all-thread rod is still
> threaded the same
> way if you turn it one way or the other  the nut
> still goes onto it
> the same direction on either end.
>
> Scot D
>
>
>
> Tesla list wrote:
>
> >Original poster: "C. Sibley" <a37chevy@xxxxxxxxx>
> >
> >Terry,
> >
> >Glad to hear that!  This morning I convinced myself
> >that I could wind it any old way and just turn it
> >upside down if it wasn't in the right direction.  I
> >realized my folly after the coil was completely
> wound.
> >  Duh!
> >
> >Thanks for the help.
> >
> >Curt.
>
>
>