[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: spray enamel vs shellack
- To: tesla@xxxxxxxxxx
- Subject: Re: spray enamel vs shellack
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 05 May 2005 21:46:42 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Thu, 5 May 2005 21:47:15 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <5ttBID.A.oq.BjueCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Malcolm Watts" <m.j.watts@xxxxxxxxxxxx>
Hi Steven,
In my experience, just about any modern varnish is better
than shellac. A single coat to hold the windings in place is all
that's required.
Malcolm
On 5 May 2005, at 17:30, Tesla list wrote:
> Original poster: "Steven Steele" <sbsteele@xxxxxxxxxxxxx>
>
> Would spray enamel be a suitable replacement for shellack to coat the
> secondary if my Tesla Col?
>
> Steven Steele
>
>
>