[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Large Tesla Coil Construction Details - Comments Requested
- To: tesla@xxxxxxxxxx
- Subject: Re: Large Tesla Coil Construction Details - Comments Requested
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Fri, 29 Jul 2005 01:33:08 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Fri, 29 Jul 2005 01:33:20 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <RSWsgC.A.gyF.4ud6CB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Mike" <mike.marcum@xxxxxxxxxxxx>
I think it will be ok unless you put some insane voltage (40-50kv) on
it. I may be wrong but since the voltage is spread out between
several turns no single spot is gonna see more than several kv
(except maybe the outer turns since they have more L than the inner).
Mike
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Wednesday, July 27, 2005 4:46 PM
Subject: Re: Large Tesla Coil Construction Details - Comments Requested
Original poster: trwalters001@xxxxxxxxxxx
Hi All,
I was thinking about using the bronze ribbon on my primary, but
started reading about significant corona from the sharp edge. Does
anyone have any thoughts/comments on this?
Tim Walters