[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Magnet Wire

To: tesla@xxxxxxxxxx
Subject: Re: Magnet Wire
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Wed, 06 Jul 2005 23:06:55 -0600
Delivered-to: testla@pupman.com
Delivered-to: tesla@pupman.com
Old-return-path: <teslalist@twfpowerelectronics.com>
Resent-date: Wed, 6 Jul 2005 23:07:12 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <WYovWC.A.76E.-hLzCB@poodle>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Harold Weiss" <hweiss@xxxxxxxxxx>

Hi Zan,

That sounds like the Westinghouse Nythane wire that I used on my early coils. It's rated at 155 C. It will work fine.

David E Weiss

Original poster: ZanJohnZakIV@xxxxxxx
Hi everyone,
The magnet wire that I am thinking about buying is dual film insulated with polyurethane and a polyimide (nylon) overcoat. It is 24 AWG and is going to be used for a 4.5 X 24 coil on PVC. Is this the right thing to be buying? If not could someone please show me where to find the right stuff to build my coil?
                Thanks,
                Zan

Prev by Date: Re: DRSSTC Field Plots
Next by Date: Re: Terry's Test - Two Manifestations of Charge
Previous by thread: Re: Magnet Wire
Next by thread: Re: Magnet Wire
Index(es):
- Date
- Thread