[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: DRSSTC design procedure - draft



Original poster: "Steve Conner" <steve.conner-at-optosci-dot-com> 

 >Mode 11:13:15:
 >http://www.coe.ufrj.br/~acmq/tesla/dr111315.gif

I'm a bit worried by this. On the 4th half cycle of primary current, ILa
peaks as Vin passes through zero. This means that the inverter has to hard
switch nearly its whole rated current.

I can't make out whether the same thing happens in the higher modes but I
would expect it to.

Steve C.