Re: Waveform Generators - Any interest in BULK board / enclosure purchase ? ? ?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 


You should have a 15-20 Volt rms output for coil tuning.  2-5 Volt rms from
the solid state ones sometimes doesn't produce enough drive.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, May 03, 2004 8:20 AM
Subject: Re: Waveform Generators - Any interest in BULK board / enclosure
purchase ? ? ?


 > Original poster: "Crow Leader" <tesla-at-lists.symmetric-dot-net>
 >
 > What would this do that ~$200 ones (instek, B&K, etc) won't do?
 >
 > KEN
 >
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Saturday, May 01, 2004 6:12 PM
 > Subject: Waveform Generators - Any interest in BULK board / enclosure
 > purchase ? ? ?
 >
 >
 >  > Original poster: "Eastern Voltage Research Corporation"
 > <dhmccauley-at-easternvoltageresearch-dot-com>
 >  >
 >  > I've been thinking about designing a high quality waveform generator
for
 >  > sometime now and wanted to find out
 >  > if there is any interest on the group for possibly a bulk board / front
 >  > panel purchase.
 >  >
 >  > Basically, I would propose designing a PCB board and also a customized
 > front
 >  > panel (to fit a nice off-the-shelf Hammond enclosure box) and sell them
 >  > together.
 >  >
 >  > The function generator would basically have:
 >  > Sine Wave
 >  > Square Wave
 >  > Triangle Wave
 >  > Pulse (adj Duty)
 >  > Sawtooth Wave
 >  >
 >  > Initially 0-5VDC with adjustable OFFSET output with the possibility of
 > going
 >  > with a power stage for high voltage output.
 >  > It would also be PLL synthesized with a crystal for high accuracy and
 >  > possibly an LCD PIC interface.
 >  >
 >  > I haven't made any decisions on whether i'll do this or not, but if
there
 > is
 >  > enough interest, i may consider pursuing it.
 >  >
 >  > Thanks
 >  > Dan
 >  >
 >  >
 >  >
 >
 >
 >