Re: Dr. Resonance Flybacks - Specifications ? ? ?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 


We tune ours to adjust to our plasma globe load, usually around 20-22 KHZ.

We run the primary at 120 VAC off AC line with a MOSFET switcher circuit.
Rectified output is around 15 kV DC, but in oil they can be operated at high
as 17-18 kV DC output.  With a voltage doubler circuit in oil at 30 kV DC
output.

Max continuous power is 75 watts.  We have run them with a doubler on a
light load at 150 watts --- charging a cap bank where the flyback only works
hard for 5-10 sec.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, March 23, 2004 12:33 PM
Subject: RE: Dr. Resonance Flybacks - Specifications ? ? ?


 > Original poster: "Mccauley, Daniel H" <daniel.h.mccauley-at-lmco-dot-com>
 >
 >
 > Thanks for the info.
 > And also, what frequency do these specific transformers work best at and
 > what
 > is the maximum primary and secondary voltage ratings on these?
 >
 > Thanks again for the help, Dr. Resonance.
 >
 > Dan
 >
 >
 >
 >
 > Primary is 70 turns of 22 AWG and sec is 4,200 turns #38 AWG.
 >
 > Dr. Resonance
 >
 > Resonance Research Corporation
 > E11870 Shadylane Rd.
 > Baraboo   WI   53913
 >
 >
 >