[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Winding primary



Original poster: "Luke" <Bluu-at-cox-dot-net> 

Two strings in parallel (such as what I am building) still seems there
is little cross sectional area.  Are you saying that because the leads
are so short they offer almost no resistance like say the ohm per 1000
feet of wire charts would indicate?

thanx

Luke Galyan
Bluu-at-cox-dot-net
http://members.cox-dot-net/bluu

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Tuesday, March 09, 2004 7:22 PM
To: tesla-at-pupman-dot-com
Subject: RE: Winding primary

Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

Hi Luke,

The key is those leads are very short and normally in parallel.  The
loss
from the skinny leads is trivial.  They do make those caps with big
strap
leads, but the cost is stunning for the special order...

Cheers,

          Terry

At 07:48 PM 3/9/2004, you wrote:
 >On the note of not needing a big honkin primary coil.....
 >I was starting on building my MMC the other day and it hit me that we
 >talk about all this high power and current in the tank circuit and use
a
 >heavy gauge for the primary when in reality as far as wire size goes
the
 >weak link seems to be the leads coming from the caps in the MMC.  They
 >are so small compared to what is suggested for the primary.
 >
 >
 >Luke Galyan
 >Bluu-at-cox-dot-net
 >http://members.cox-dot-net/bluu
 >
 >-----Original Message-----
 >From: Tesla list [mailto:tesla-at-pupman-dot-com]
 >Sent: Tuesday, March 09, 2004 5:56 PM
 >To: tesla-at-pupman-dot-com
 >Subject: Re: Winding primary
 >
 >Original poster: "Antonio Carlos M. de Queiroz" <acmq-at-compuland-dot-com.br>
 >
 >Tesla list wrote:
 >  >
 >  > Original poster: Gregory Hunter <ghunter31014-at-yahoo-dot-com>
 >
 >  >... Finally, if
 >  > the first primary looks like a nightmare, discard the
 >  > Cu tube and try again. You're only out $12 or
 >  > so--chicken feed in this cash-intensive hobby!
 >
 >And note that unless your coil is a really big thing, there is no
 >technical reason to use tubing for the coil. Any reasonably thick
 >wire is more than enough. All my primaries were made with #18
 >solid wire (Ok, a 5 kV x30 mA NST doesn't give a lot of power).
 >http://www.coe.ufrj.br/~acmq/tesla/tefpprim.jpg
 >Not a work of art, but cheap and works.
 >
 >Antonio Carlos M. de Queiroz