[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: gdt



Original poster: "Hydrogen18" <hydrogen18-at-bellsouth-dot-net> 

the number of turns depends on voltage...and if they are on a reasonably
sized ferrite core(toroid perhaps) it should be coupled quite closely.

---Eric
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, July 10, 2004 9:51 PM
Subject: gdt


 > Original poster: "claude masetto" <claudmas-at-optusnet-dot-com.au>
 >
 > Hello,
 > Could someone tell me the best way to wind a GDT with a turns ratio of
1:2:2
 > and still maintain good coupling between primary and secondary. Also, what
 > seems to be a good number of turns.
 >
 > Thanks
 > Claude.
 >
 >
 >


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft-dot-com).
Version: 6.0.716 / Virus Database: 472 - Release Date: 7/5/2004