Re: Wiring MOTs

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com> 

ok, so how do I wire them then?

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, January 25, 2004 2:30 PM
Subject: Re: Wiring MOTs


 > Original poster: "Malcolm Watts" <m.j.watts-at-massey.ac.nz>
 >
 > On 24 Jan 2004, at 19:15, Tesla list wrote:
 >
 >  > Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com>
 >  >
 >  > Ok, I'm no genius on electronics but know a good bit. Heres how I
 >  > would do it. Ground the first core. Take the high voltage output wire
 >  > of that one, connect it to the core of the next. Then take the high
 >  > voltage wire coming out of that one and connect it to the core of the
 >  > next. The ground core will be your 0 volts, the final high voltage
 >  > wire will be your high voltage out.
 >
 > I suggest that you try your approach before recommending it to
 > others. On the face of it it appears that potential difference
 > between the primary windings and cores of succeeding transformers has
 > been overlooked.
 >
 > Malcolm
 > <snip>
 >
 >
 >


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft-dot-com).
Version: 6.0.556 / Virus Database: 348 - Release Date: 12/28/2003