[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: PRIMARY COIL TURNS



Original poster: Mike <megavolts61-at-yahoo-dot-com> 


Hi Ravi,

  No one will be able to tell  you this until you let us know what wire size

and how many turns you will put onto your secondary and also what

topload (sphere or toroid...and the size of it) that you plan to use.

Mike


Hi, this is ravi, i am trying to make a small coil from a 3" x18" pipe
for
sec., 7.5kV 29mA NST, salt water caps, two 1" pipes for s. gap., and
1/4"
copper tubing for the primary, could someone tell me how many turns i
should make the primary? like what would be good?