[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fw: rotary spark gap that timing can be changed



Original poster: "marcus  conner" <connerelectric-at-hbeark-dot-com> 



-------Original Message-------

From: marcus conner
Date: Monday, February 16, 2004 08:47:05
To: jocatch-at-us.ibm-dot-com
Cc: connerelectric-at-hbeark-dot-com
Subject: rotary spark gap that timing can be changed


hi i am marcus conner
i have experimenter quiet a bit with tesli coils i took and made a 4in disk 
out of plexar i put 4 electrodes in it equally spaced iput the disc on a 4 
pole electric fan motor i took the armature out of the motor and ground it 
down kinda square thic made the motor sink speed 1800 rpm   by rotating the 
motor in the mounting you can time where it fires on the 60 cy sine 
wave  ant way yuo might gat some ideas from this i am a retieed electrician 
i live in north west ark i have a small electrical shop i con get 
transformer oil and all kinds of insulating varnish   one time i used a hi 
voltage transformer of a plasma cuter it had the hi voltage cap spark gap 
all i had to do was wind the coils i used it with a smaller coil i got 
about 6in sparks  and a lot of karona all so a lot of ozone gas
    from marcus conner

http://hot-streamer-dot-com/temp/feb16554.jpg