[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Secondary form coating.



Original poster: "Harold Weiss" <hweiss-at-new.rr-dot-com> 

Hi All,

Alcohol will craze plexiglass. (acyrlic)

David E Weiss

 > Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net>
 >
 > Hi Ed,
 >
 > The solvents in the shellac are alcohols (methanol, ethanol, and
 > isopropanol).  i would think these would be OK.
 >
 > Gerry R
 >
 >  > Original poster: Ed Phillips <evp-at-pacbell-dot-net>
 >  >
 >  >>
 >  > I'd avoid any solvent-based lacquer with acrylic unless I'd done a
 >  > careful test first.  It can craze at times, but not like polystyrene.
I
 >  > use shellac and it works fine for me, but there are probably better
 >  > materials.
 >  >
 >  > Ed
 >  >
 >  >
 >
 >
 >