Re: Removing Pig Top

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Bart Anderson <classi6-at-classictesla-dot-com> 

Hi Adam,

Just unscrew the top wing-bolt. This bolt screws into a bracket below the 
top cover. Anyway, the top cover will come off. There is a seal on the 
inside perimeter of the cover which will probably cause the cover to still 
"feel" tightened. Just lightly tap around the outer perimeter of the cover 
with a hard rubber mallet to break the seal. Then the cover can be lifted 
up (but remember, the terminals are connected).

Take care,
Bart

Tesla list wrote:

>Original poster: Yurtle Turtle <yurtle_t-at-yahoo-dot-com>
>How does one remove the pig top from:
>
>http://www.hot-streamer-dot-com/adam/garage/pig_14.4kV_25kVA_2.jpg
>
>http://www.hot-streamer-dot-com/adam/garage/pig_14.4kV_25kVA_3.jpg
>
>thanks
>Adam
>
>_
>
>
>
>