[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Terry's DRSSTC - Stuff



Original poster: "Denicolai, Marco" <Marco.Denicolai@xxxxxxxxxxx>

Hi Terry,

Looks like a fine project to me! Just a suggestion: if you are still in
time, use a GND fill layer on the pulse controller PCB and good
decoupling near the microcontroller power pins. It really makes your
life easier.

Best Regards

> -----Original Message-----
> From: Tesla list [mailto:tesla@xxxxxxxxxx]
> Sent: 22. joulukuuta 2004 03:12
> To: tesla@xxxxxxxxxx
> Subject: Terry's DRSSTC - Stuff
>
> Original poster: Terry Fritz <teslalist@xxxxxxxxxxxxxxxxxxxxxxx>
>
> Hi All,
>
> Just to update.
>
> I have been thinking about how to "stuff" everything into the chassis:
>
> www.drsstc.com
>
<SUPERSNIP>
> Cheers,
>
> 	Terry
>
>
>
>
============================================================
The information contained in this message may be privileged
and confidential and protected from disclosure. If the reader
of this message is not the intended recipient, or an employee
or agent responsible for delivering this message to the
intended recipient, you are hereby notified that any reproduction,
dissemination or distribution of this communication is strictly
prohibited. If you have received this communication in error,
please notify us immediately by replying to the message and
deleting it from your computer. Thank you. Tellabs
============================================================