[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How to make a "good" copper tubing clamp



Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 


At RF frequencies all 4 of these would be a poor choice.  Best to stick with
brass or copper.

Dr. Resonance

 >   RE: How to make a "good" copper tubing clamp
 >
 > Go to a hot rod shop, or air craft supply and ask for an Adel clamp. It
 > is a metal strap 1/4 to 1/3 wide with a small bolt to clamp with. You
 > can get them in SS , steel , Ti and alum , from 1/4 dia up to 3 or 4
 > inches.  I use them to hold coax bundles to my tower and elec lines .
 > They are used to hold down fuel , elec and hyd lines.
 >