[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: JAVATC v10



Original poster: Bart Anderson <classi6-at-classictesla-dot-com> 

Hi Adam,

Sounds good!

We can talk further off the list. I think it would be "great" for you to 
work on this and I will be happy to help out. I'll write you off list.

Take care,
Bart

Tesla list wrote:

>Original poster: "Adam Horden" <electronicmadman-at-blueyonder.co.uk>
>Hi,
>
>I started writeing a simular version of java tc in Visual Basic a couple of
>months ago. Havent touched it in a while as I couldent find out what people
>would like to see in a programme like that. Java tc has it all and its made
>my VTTC work at lot eaiser.
>
>If I could find a list of formulars for TC work I might drag out the source
>and carrry on with it.
>
>There would then be a offline version avaible. With a neat and easy to use
>GUI.
>
>Adam
>----- Original Message -----
>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: <tesla-at-pupman-dot-com>
>Sent: Tuesday, September 23, 2003 2:56 PM
>Subject: Re: JAVATC v10
>
>
> > Original poster: Bart Anderson <classi6-at-classictesla-dot-com>
> >
> > Hi Terry,
> >
> > Thank you. I still have updates to make as time allows and more outputs to
> > include (forward transfer impedance, etc.). Gerry has provided several
>good
> > thoughts. It would be nice to see a program of this "type/ability" written
> > in C or Java where the program could be compiled to increase speed and get
> > away from browser/javascript limitations, but I'm not the right person for
> > that. Someday someone will do it.
> >
> > Thanks again and take care,
> > Bart
> > PS: Stangenes is working perfectly. Went though various measurements this
> > weekend including planewave calibration etc.. (seems I use the planewave
> > almost exclusively these days as well as the low-z amp). Excellent toys!!
> >
> > Tesla list wrote:
> >
> > >Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>
> > >
> > >Hi Bart,
> > >
> > >I just wanted to say THANKS!! for working so hard on this wonderful
>program!!
> > >
> > >I incorporates all the latest theory and everything into one program!!
> > >
> > >By far, the most powerful and comprehensive Tesla coiling program out
> > >there now!!
> > >
> > >Cheers,
> > >
> > >         Terry
> > >
> > >
> > >At 09:17 PM 9/19/2003 -0700, you wrote:
> > >
> > >>Hi ALL -
> > >>
> > >>JAVATC version 10 has been in testing for a couple months now. I think
> > >>it's finally ready for all List members to use it as they see fit. It is
> > >>a complete re-write. I wanted to take advantage of Paul Nicholson's
>GEOTC
> > >>(the core code which FANTC uses) and pull GEOTC's accuracy into JAVATC.
> > >>This has been accomplished, but was not an easy task. I'd like to say  a
> > >>special thank you to John Couture and Gerry Reynolds for their very
> > >>detailed feedback over the past couple months. I'd also like to thank
> > >>everyone else who tested the program.
> > >>
> > >>JAVATC will now account for walls, ceiling, groundplane, multiple
>topload
> > >>objects, and inductive and capacitive variations due to non-linear
> > >>current distribution. JAVATC can now run helical, cone, inv. cone, and
> > >>flat geometry for
> > >
> > >
> > >..........
> > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>