Re: hooking up T5587 balancing chokes

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: BunnyKiller <bunikllr-at-bellsouth-dot-net> 



Tesla list wrote:

>Original poster: Tesla729-at-cs-dot-com
>Hi all,
>
>I am paralleling (2) 1256D variacs and do have an extra
>T5587 balancing choke. I was wanting to make sure that
>I hooked the 2 variacs to it properly the first, w/out
>the fire works :^) If I'm figuring correctly, I would
>just hook each variac to one side of each of the choke
>coils (H1 and H3 or H2 and H4) and tie the two remain-
>ning leads together as the output of the two paralleled
>variacs. Does this sound right?
>
>Thanks,
>David Rieben
>

sounds right    but for more info goto


http://www.bellsouthpwp-dot-net/b/u/bunnykiller/parallel.html

for more info and schematics...

Scot D