[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: using ignition coils for marx supply



Original poster: "Daniel Barrett" <dbarrett1-at-austin.rr-dot-com> 

	Yes, they can be connected in series with no balancing caps or resistors
and they will work fine. The uneven reverse voltage distribution problems
which used to be a problem really don't occur much with modern diodes such
as the UF4007 (better matching.
db
---
Original poster: "RIAA/MPAA's Worst Nightmare" <mike.marcum-at-zoomtown-dot-com>

So these can be put in series? wouldn't they overvolt unless there was a way
to ensure they switched at the same time? I was going to buy a few single
60kv .5A superfast ones ($200 each for 200khz rectification), but this would
save a fortune.