[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: tank circuit



Original poster: tullera-at-optusnet-dot-com.au 


  i was talking about wiring from the cap to the primary?

 > Tesla list <tesla-at-pupman-dot-com> wrote:
 >
 > Original poster: robert & june heidlebaugh
 > <rheidlebaugh-at-desertgate-dot-com>
 >
 > YES, that is what most of us do for our primaries
 >     Robert   H
 > --
 >
 >
 >  > From: "Tesla list" <tesla-at-pupman-dot-com>
 >  > Date: Mon, 17 Nov 2003 07:20:22 -0700
 >  > To: tesla-at-pupman-dot-com
 >  > Subject: tank circuit
 >  > Resent-From: tesla-at-pupman-dot-com
 >  > Resent-Date: Mon, 17 Nov 2003 07:34:49 -0700
 >  >
 >  > Original poster: "margaret louise" <tullera-at-optusnet-dot-com.au>
 >  >
 >  > Would it work ok just to use 1/4 inch coppet tubing for the tank
 > circuit
 >  > wiring. provided there is enough distance between wires to stop
 > them arcing
 >  > over?
 >  >
 >  >
 >  >
 >  >
 >