[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: figures for spark length/voltage for impulse discharge



Original poster: "Jim Lux by way of Terry Fritz <teslalist-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>

For real high voltages, where a standard rod gap (5/8" inch rods) is a 
"needle point", you can use the rod gap tables..
http://home.earthlink-dot-net/~jimlux/hv/rodgap.htm



At 07:34 AM 5/1/2003 -0600, you wrote:
>Original poster: "Mike Harrison by way of Terry Fritz 
><teslalist-at-qwest-dot-net>" <mike-at-whitewing.co.uk>
>
>Does anyone have any rough figures for volts/inch spark length for a 
>single impulse discharge
>between sharp points (Marx generator) ?