Re: HV Wire - electrical tape?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Dr.Resonance by way of Terry Fritz <teslalist-at-qwest-dot-net>" <resonance-at-jvlnet-dot-com>


It's a waste of time and ends in a cobble job that may or may not work
properly.

Just use standard neon GTO wire for hooking up all NST powered coils.  It
works great and is flexable.

Dr. Resonance




----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, January 01, 2003 5:19 PM
Subject: Re: HV Wire - electrical tape?


 > Original poster: "Jonathon Reinhart by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <tc_jonathon-at-hotmail-dot-com>
 >
 > Hello everyone, I'm back after AOL stopped delivering ALL of my TCML
 > emails... ( I'm Kidd6488-at-aol-dot-com )
 >
 >     On the topic of cheap HV wire, what about wrapping any guage of wire
 > with electrical tape?  Even though it's UL listed for only 600V, aren't
the
 > ratings much higher? I've seen some for 10,000 V I believe...
 >     Put a few layers of that on there and you could have some 30, 40, 50
kV
 > wire, right?
 >
 > Jonathon Reinhart
 > hot-streamer-dot-com/jonathon
 >
 > _
 >
 >